TIS_Sequential
$150.00
El método Sequential completo para NinjaTrader 8: Setup de 9 velas y Countdown de 13 para detectar agotamiento, con detección del 9 perfecto y señales expuestas para Markers.
The full Sequential method for NinjaTrader 8: 9-bar Setup and 13-bar Countdown to spot exhaustion, with perfect-9 detection and signals exposed for Markers.
Descripción
TIS_Sequential para NinjaTrader 8
El método Sequential completo: el Setup de 9 velas y el Countdown de 13, para detectar el agotamiento antes del giro.
Qué hace
TIS_Sequential cuenta las velas de un movimiento para indicar cuándo se está quedando sin fuerza. El Setup cuenta cierres consecutivos por encima, o por debajo, del cierre de cuatro velas antes; una cuenta de 9 marca el primer punto de agotamiento. Después de un 9, el Countdown sigue contando, sin necesitar velas consecutivas, hasta llegar a 13, el segundo punto de agotamiento, más tardío. Los dos dan una señal contra el movimiento.
Setup del 1 al 9
Cuenta cierres consecutivos por encima del cierre de cuatro velas antes, o por debajo. La cuenta arranca en el cambio de dirección del precio y se muestra en el gráfico vela por vela.
Countdown del 1 al 13
Después de un 9, cuenta las velas que cierran en o más allá del extremo de dos velas antes. No hace falta que sean consecutivas.
9 perfecto o imperfecto
Un 9 es perfecto cuando su extremo supera los de las velas 6 y 7. Si no, una línea naranja marca el nivel que todavía falta.
Filtros opcionales
Filter Imperfect Signals deja solo los 9 perfectos; Strict Countdown solo arranca el Countdown después de un 9 perfecto.
Señales contra el movimiento
Una cuenta alcista da señal de venta en el 9 y en el 13; una cuenta bajista da señal de compra.
Listo para automatizar
Las señales de compra y venta y la cuenta con signo se exponen como plots. Los scripts que llaman a la versión anterior siguen funcionando.
Cómo se forma una señal
1. Setup
Nueve cierres consecutivos por encima, o por debajo, del cierre de cuatro velas antes. El 9 da la primera señal contra el movimiento.
2. Countdown
Desde ese 9, cada vela que cierra en o más allá del extremo de dos velas antes suma uno, sea consecutiva o no.
3. Trece
Cuando el Countdown llega a 13 se da la segunda señal, en la misma dirección que la del 9.
Parámetros
| Parámetro | Por defecto | Qué hace |
|---|---|---|
| Show from Sequence # | 1 | Primer número del Setup que se muestra en el gráfico. |
| End Sequence | 9 | Último número del Setup que se muestra. |
| Filter Imperfect Signals | Off | Solo los 9 perfectos dan señal. |
| Show Countdown (1-13) | On | Calcula y muestra el Countdown. |
| Strict Countdown Start | Off | El Countdown solo arranca después de un 9 perfecto. |
| Paint Fast Signals | On | Escribe los plots de señal. Dejalo encendido para automatizar. |
| Paint Arrows | Off | Dibuja flechas en las velas de señal. |
| Text, Arrows, Signal y Countdown offsets | 4 / 15 / 12 / 8 | Distancia en ticks de cada elemento a la vela. |
| Colores y fuente | Colores del Setup y del Countdown, y fuente de los números. |
Salidas
| Plot | Contenido |
|---|---|
| Seq UP | Tiene valor solo en la vela de una señal de compra, en el 9 o en el 13. |
| Seq DN | Tiene valor solo en la vela de una señal de venta, en el 9 o en el 13. |
| Sequence | Cuenta actual del Setup con signo: positiva en cuenta alcista, negativa en bajista. |
Automatizalo con Markers
Markers lee las señales de compra y venta y envía las órdenes, con tu target, stop y horario de operación. Combinarlas con un filtro de tendencia evita operar contra movimientos fuertes. Markers se vende por separado.
Requisitos
NinjaTrader 8.
TIS_Sequential for NinjaTrader 8
The Sequential method in full: the 9-bar Setup and the 13-bar Countdown, to spot exhaustion before the turn.
What it does
TIS_Sequential counts the bars of a move to tell when it is running out of steam. The Setup counts consecutive closes above, or below, the close four bars earlier; a count of 9 marks the first exhaustion point. After a 9, the Countdown keeps counting, without needing consecutive bars, until it reaches 13, the second and later exhaustion point. Both give a signal against the move.
Setup 1 to 9
Counts consecutive closes above the close four bars earlier, or below it. The count starts on the price flip and is shown on the chart bar by bar.
Countdown 1 to 13
After a 9, counts the bars that close at or beyond the extreme of two bars earlier. They do not need to be consecutive.
Perfect or imperfect 9
A 9 is perfect when its extreme exceeds those of bars 6 and 7. If it does not, an orange line marks the level still needed.
Optional filters
Filter Imperfect Signals keeps only perfect 9s; Strict Countdown only starts the Countdown after a perfect 9.
Signals against the move
An upward count gives a sell signal at 9 and at 13; a downward count gives a buy signal.
Ready for automation
Buy and sell signals and the signed count are exposed as plots. Older scripts that call the previous version keep working.
How a signal forms
1. Setup
Nine consecutive closes above, or below, the close four bars earlier. The 9 gives the first signal against the move.
2. Countdown
From that 9, every bar that closes at or beyond the extreme of two bars earlier adds one, consecutive or not.
3. Thirteen
When the Countdown reaches 13, the second signal is given, in the same direction as the one at 9.
Parameters
| Parameter | Default | What it does |
|---|---|---|
| Show from Sequence # | 1 | First Setup number shown on the chart. |
| End Sequence | 9 | Last Setup number shown. |
| Filter Imperfect Signals | Off | Only perfect 9s give a signal. |
| Show Countdown (1-13) | On | Calculates and shows the Countdown. |
| Strict Countdown Start | Off | The Countdown only starts after a perfect 9. |
| Paint Fast Signals | On | Writes the signal plots. Keep it on to automate. |
| Paint Arrows | Off | Draws arrows on the signal bars. |
| Text, Arrows, Signal and Countdown offsets | 4 / 15 / 12 / 8 | Distance in ticks of each element from the bar. |
| Colors and Font | Setup and Countdown colors, and the font of the numbers. |
Outputs
| Plot | Content |
|---|---|
| Seq UP | Value only on the bar of a buy signal, at 9 or at 13. |
| Seq DN | Value only on the bar of a sell signal, at 9 or at 13. |
| Sequence | Current Setup count with its sign: positive on an upward count, negative on a downward one. |
Automate it with Markers
Markers reads the buy and sell signals and sends the orders, with your target, stop and trading hours. Combining them with a trend filter keeps you from fading strong moves. Markers is sold separately.
Requirements
NinjaTrader 8.
Solo los clientes que hayan comprado este producto pueden dejar una opinión.















Opiniones
Aún no hay opiniones.